Universidad de Oviedo-ko ikertzaileekin lankidetzan egindako argitalpenak (19)

2024

  1. Effect of electrochemical charging on the hydrogen embrittlement susceptibility of a low-alloyed tempered martensitic steel submitted to high internal pressure

    International Journal of Hydrogen Energy, Vol. 63, pp. 657-667

  2. Evaluating hydrogen embrittlement susceptibility of a 2205 DSS

    Procedia Structural Integrity

  3. Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting

    Procedia Structural Integrity

  4. Mechanical and Fatigue Properties of Ti-6Al-4V Alloy Fabricated Using Binder Jetting Process and Subjected to Hot Isostatic Pressing

    Materials, Vol. 17, Núm. 15

2023

  1. Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study

    International Journal of Hydrogen Energy, Vol. 48, Núm. 90, pp. 35347-35365

  2. Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size

    Engineering Fracture Mechanics, Vol. 289

2022

  1. Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados

    Revista española de mecánica de la fractura, Núm. 3, pp. 51-56

  2. Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting

    International Journal of Fatigue, Vol. 163

  3. Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel

    Engineering Fracture Mechanics, Vol. 274

  4. Parameter Optimisation in Selective Laser Melting on C300 Steel

    Applied Sciences (Switzerland), Vol. 12, Núm. 19

2021

  1. Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanisms

    Engineering Fracture Mechanics, Vol. 241

  2. Influence of non-homogeneous microstructure on hydrogen diffusion and trapping simulations near a crack tip in a welded joint

    Theoretical and Applied Fracture Mechanics, Vol. 112

2020

  1. Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

    Theoretical and Applied Fracture Mechanics, Vol. 110

2016

  1. Damage modeling in Small Punch Test specimens

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 51-60

  2. Determination of the creep crack initiation properties using pre-cracked small punch tests

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 39-44

  3. Mechanical behavior and failure analysis of recycled polymers by use of miniature punch specimens

    Journal of Applied Polymer Science, Vol. 133, Núm. 4

2015

  1. Effect of confinement level on mechanical behaviour using the small punch test

    Engineering Failure Analysis, Vol. 58, pp. 206-211

  2. Influence of the notch shape of pre-notched small punch specimens on the creep failure time

    Engineering Failure Analysis, Vol. 56, pp. 332-337

2011

  1. Analysis of different techniques for obtaining pre-cracked/notched small punch test specimens

    Engineering Failure Analysis, Vol. 18, Núm. 8, pp. 2282-2287