Publicaciones (23) Publicaciones de MIRIAM LORENZO BAÑUELOS

2023

  1. Comportamiento en fatiga de una aleación de Ti-6Al-4V fabricada mediante Binder Jetting

    Revista española de mecánica de la fractura, Núm. 5, pp. 275-280

  2. Deformation kinetics of PA-12 components processed using the AM-SLS technology

    Revista española de mecánica de la fractura, Núm. 6, pp. 185-190

  3. Efecto en las propiedades mecánicas del tamaño de impresión de estructuras tipo lattice de PA-12 fabricada mediante SLS

    Revista española de mecánica de la fractura, Núm. 6, pp. 215-220

  4. Methodology to predict mechanical properties of PA-12 lattice structures manufactured by powder bed fusion

    Additive Manufacturing, Vol. 78

  5. Study of crystallization and melting-solidification processes in some fatty acids as phase change materials (PCMs)

    13th National and 4th International Conference in Engineering Thermodynamics. Advances in Engineering Thermodynamics: The Key to Sustainable Development

2022

  1. Density, Viscosity, Refractive Index, and Related Thermophysical Properties of Dibutyl Ether +2-Butanol + Cyclohexane Ternary Systems

    Journal of Chemical and Engineering Data, Vol. 67, Núm. 12, pp. 3532-3542

  2. Material Extrusion Additive Manufacturing of Poly(Lactic Acid): Influence of infill orientation angle

    Additive Manufacturing, Vol. 59

  3. Propiedades anisotrópicas dependientes de la velocidad de deformación en componentes poliméricos obtenidos mediante fabricación aditiva

    Revista española de mecánica de la fractura, Núm. 4, pp. 151-156

2021

  1. Influence of atmospheric plasma spray parameters (APS) on the mechanical properties of Ni-Al coatings on aluminum alloy substrate

    Metals, Vol. 11, Núm. 4

  2. Predicción de propiedades mecánicas de PoliÁcido Láctico (PLA) procesado mediante moldeo por compresión y fabricación aditiva (FDM)

    Revista española de mecánica de la fractura, Núm. 2, pp. 137-144

  3. Print velocity effects on strain-rate sensitivity of acrylonitrile-butadiene-styrene using material extrusion additive manufacturing

    Polymers, Vol. 13, Núm. 1, pp. 1-20

2020

  1. Anisotropic rate-dependent mechanical behavior of Poly(Lactic Acid) processed by Material Extrusion Additive Manufacturing

    Additive Manufacturing, Vol. 31

  2. Application of design thinking methodology to a crank-connecting rod mechanism by means of additive manufacturing for its implementation in the classroom

    14th international technology, education and development conference (inted2020)

  3. Application of fdm (r) additive manufacturing technology in the learning of engineering courses: orientation of stress and strain tensor

    14th international technology, education and development conference (inted2020)

  4. Influence of raster orientation on the determination of fracture properties of polypropylene thin components produced by additive manufacturing

    Theoretical and Applied Fracture Mechanics, Vol. 107

  5. Strain-rate-dependent properties of short carbon fiber-reinforced acrylonitrile-butadiene-styrene using material extrusion additive manufacturing

    Rapid Prototyping Journal, Vol. 26, Núm. 10, pp. 1701-1712

2016

  1. Application of the Small Punch Creep test to predict times to rupture on magnesium alloys

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 45-50

2014

  1. An Extension of the Monkman-Grant Model for the Prediction of the Creep Rupture Time Using Small Punch Tests

    Experimental Mechanics, Vol. 54, Núm. 8, pp. 1441-1451

  2. Erratum: Magnesium alloy defectology AZ91D high-pressure die cast and influence on the fatigue behaviour (Fatigue and Fracture of Engineering Materials and Structures (2013) 36:10 (1017-1026))

    Fatigue and Fracture of Engineering Materials and Structures

  3. Influence of strain state in mechanical behaviour of aluminium alloys using the Small Punch Test

    Materials and Design, Vol. 54, pp. 291-294